Nhảy đến nội dung
x
Labeling of the CLAW LINE system with all relevant user information.
CLAW INTERMEDIATE SET is a traversable intermediate holder and suitable for 8 mm ropes and round rungs with a diameter of 32-46 mm.
CLAW INTERMEDIATE SET is a traversable intermediate holder and suitable for 8 mm ropes and round rungs with a diameter of 20-31 mm.
CLAW INTERMEDIATE SET is a traversable intermediate holder and suitable for 8 mm ropes and rectangular rungs 32-46 mm.
CLAW INTERMEDIATE SET is a traversable intermediate holder and suitable for 8 mm ropes and rectangular rungs 20-31 mm.
Extremely durable, corrosion-resistant stainless steel cable with eyelet for fixed-installation vertical CLAW LINE arrester systems for use in combination with the single anchor point D-BOLT and the TOP POST as well as tested structural attachments
For use in D-bolt, building side fixtures and step-over, always in conjunction with CL-013, but can also be used with other top anchor points.
The shackle is used to attach the stainless steel cable (CL-008-D) to CALW LINE system components such as D-BOLTs or tested structural anchor points.
CLAW LINE BOTTOM ANCHOR POINT for the "ladder fastening" system version, where the fall-arrest system can be fastened directly to the aluminium ladder used
CLAW LINE TENSION is a stainless steel (V4A) tensioning device for permanently-installed vertical CLAW LINE fall-arrest systems.
CLAW LINE TOP POST ALUMINIUM LADDER is made of galvanized steel and is used for stepping over aluminum ladders and is also certified for slinging connectors according to DIN EN 795.
The CLAW LINE STRUCTURE ANCHOR POINT can be used on an existing structure as an upper and/or lower anchor point for the CLAW LINE fall-arrest system
Subscribe to Hệ Thống Dây Cứu Sinh Phương Dọc